Diskuse o detektoru PMD BASIC

[kadir6141]

Ahoj Jaký je význam SP03?

[kadir6141]

hi friends what is name 'SP03' ? pleaSE help

[kadir6141]

Hi friends, share information, I think no one on this forum does not respond to the questions no one

[ZdenekHQ]

Hi, dont be hurry, here was a Christmas.

SPxx is SMD 1206 0R resistor (junction) : http://www.tme.eu/en/details/smd1206-0r ... 4j-0r-t5e/

[kadir6141]

hi.pcb trimpot RP1 and RP2 have four legs. how are they a trimpot

o
o o
o

[kadir6141]

hi friends Which of the changes made to upd 3

[ZdenekHQ]

Hi,
there is a SMT 4052 for better METER function.

Or may be I dont understand your ask...

[kadir6141]

thanks

[kadir6141]

hi. d21? d22? What will be the value of
thanks

[ZdenekHQ]

D21,22 is 1N4148. Schottky is not so good.

[kadir6141]

hi zdenekHQ CI1 schematics 22nf but pcb on 10nf Which one is right?
R7 schematics 22k pcb on 470k
http://postimg.org/image/6umfbpkf7/
http://postimg.org/image/y3xsq7lib/
http://postimg.org/image/46sdnm203/
http://postimg.org/image/fabzt7nab/

[kadir6141]

Dobrý den, mám pár otázek. 78L05 a 6.2 v Zenerova dioda se přehřívá. 10k rezistor 9 pin zde PCB, stejně jako odolnost 9p 8 pin pcb 10k také pravda, že 7 pin me. Tam jsou také ne5534 14v 6 pin. Existují místa, na 7.5V 14V. Neexistuje žádný zvukový výstup. pokud byste mohli pomoci.


hi friends I have a few questions. 78L05 is overheating. 6.2v zener diode gets very hot. 7.5V =14v 17.5V=14v also in place in areas of there. There 4v coil test point. 10k resistor in place as the location of the missing AT89C2051 2 pin on the right side to the left of the first pin is missing. ne5534 6 There the pin 14V . can you help
http://postimg.org/image/qito5s9gb/

[ZdenekHQ]

Hi, this is too old and closed project, but if you will buy my PMD DIGI board and you will pay for it via bank transfer or Paypal, I will sent to you PMD BASIC full assembled board as present (used, but working).